This advanced service door is well suited for any application that requires a rolling steel door with the added benefits of high cycles, increased productivity and durability including banks, manufacturing facilities, and parking garages. It is ideal for customers in the parking garage market wanting to replace grilles. The fenestrated slats allow air circulation; they are more durable than grilles and more secure than fabric doors.
Standard Features At a Glance
- Max. standard width
20' (6096 mm)
- Max. standard height
20' (6096 mm)
- Mounting
Interior or Exterior face of wall
- Curtain
- Interlocking roll-formed slats, end locks attached to prevent lateral movement; 22 gauge galvanized steel
- Curved Profile type C-187 for doors up to 15'4" wide; 22 gauge galvanized steel
- Curved Profile type C-275 for doors up to 20' wide; 22 gauge galvanized steel
- Flat Profile type F-265 for doors up to 20' wide; 22 gauge galvanized steel
- Bottom Bar
Two PowderGuard® Premium powder coated black angles (min. thickness 3/16") with 2-wire, self-monitoring, fail safe, electric sensing edge
- Guides
Three structural steel angles PowderGuard® Premium powder coated black
- Operation
Direct drive hypoid gear motor/brake assembly (20” per sec up speed / 12” per sec down speed); drive assembly and limit sensors are factory pre-assembled; manual crank for power outage
- Control Panel
Variable frequency drive controller with self diagnostics (time delay self close timer and non-resettable cycle counter included); two line LCD readout, enclosure NEMA 4X rated
- Door Roll
Direct driven, springless roll with integrated shafts; self aligning greasable sealed bearings; door does not require counterbalance device
- Hood
24 gauge galvanized steel primed, black painted
- Brackets
Min. 1/4" hot rolled primed, black painted steel
- Safety Devices
- Built-in drop stop device – patent pending design provides additional peace-of-mind against uncontrolled curtain travel in a high vehicular traffic area
- Continuously monitored sensing edge – all doors are equipped with a mandatory reversing or sensing edge to prevent entrapment. If the edge itself is damaged, it will need to be replaced in order for the door to operate without constant contact
- Photoelectric safety sensors with guards – provide additional safety during door operation to help prevent injury and damage
- Actuator
Single open/close/stop push button station incorporated into Control Panel
- Curtain Finish
Gray, tan or white PowderGuard® Premium powder coat with hardening additive
- Windload
20 psf when wear strips are not specified
Options:
- Curved Profile type C-187 for doors up to 15’4” wide also available in: 20, 18 ga. galvanized steel; 22, 20 ga. stainless steel; 18-gauge Aluminum
- Curved Profile type C-275 for doors up to 20’ wide also available in: 20, 18 ga. galvanized steel; 22, 20 ga. stainless steel; 16-gauge Aluminum
- Flat Profile type F-265 for doors up to 20’ wide also available in: 20, 18 ga. galvanized steel; 22, 20 ga. stainless steel; 16-gauge Aluminum
- Bottom Bar also available in: galvanized steel; stainless steel; aluminum
- Guides also available in: galvanized steel; power coated steel; stainless steel
- Hood also available in: powder coat; stainless steel; aluminum. Sloped Hood also available.
- Brackets also available in: powdercoat; galvanized steel; stainless steel
- Direct Drive motors available in 1/2 HP, 1 HP, 2 HP and 208/230/460 VAC 3-ph
- Dual photoelectric sensors available for safety
- Optional push buttons, loop detectors, radio control, motion detectors, or any combination thereof available for door operation/control
- PowderGuard® Premium powder coat finish with hardening additive available in up to 197 colors as well as color-matching to specification
- Wear strips are an available option, please note that the 20 psf wind load rating is no longer available when wear strips are selected
- For fenestrated service doors, provide slats with 3"x 5/8" (C-275 or F-265 slats) or 10"x 1" (F-265 slat) uniformly spaced openings. The fenestrations can be open or with acrylic vision lite
- For ventilated/perforated service doors, provide slats with 1/16" (16 mm) diameter perforations 3/32" (2.4 mm) on center staggered rows
(18-gauge C-275) (18-gauge F-265)
